How It Works

HOW IT WORKS

WATCH HOW

Simply fill with water & soap or just WATER.

Spray for up to 10 nappy changes before needing to refill.

We recommend using gentle and no
scented soap (pH neutral emollient based) to clean the nappy area, paying special attention to the folds.

Easy to Refill

OPEN BBS.png__PID:4edc49cd-97b4-45e6-bcac-962a9a63c41a

Step 1.
Unscrew the lid

water fill.png__PID:761b8123-2eab-4491-96eb-39cdf352fe92

Step 2.
Fill the device with lukewarm water

secure the lids.png__PID:a0088dfa-dadf-4025-abb9-945f59867f6b

Step 3.
Then securely screw the lid on

squeeze lead.png__PID:811d5f35-2cfe-4ca8-b8d0-1f8c75be8601

Step 4.
Use a gentle pressure to emit a spray of water onto your hand.

This way, you can feel the temperature and make sure it's comfortable for your baby's sensitive skin.

Back on top

Learn to Clean
Wet Nappy / Diaper

Step 01 new.png__PID:a86f0184-b530-425a-9c68-22f4decab05e

Step 1.
Open the wet nappy / diaper and leave it under the baby’s bottom.

Step 02 new.png__PID:1e455caf-d4c9-46d5-a034-a330d619342f

Step 2.
Squeeze the Baby Bum Shower to spray the baby’s bottom and cleaning away any pee.

Step 03 new.png__PID:eb3b0e9b-4f51-4b57-85bf-3a6e2097c8d8

Step 3.
Remove the wet nappy / diaper from under the baby’s bottom.

Step 04 new.png__PID:0555ebfc-edaa-4eb5-b03b-eb60690b0c66

Step 4.
Spread nappy / diaper cream on the baby’s bottom.

Put a new clean nappy / diaper on the baby.

Back on top

Learn to Clean
Dirty Nappy / Diaper

Step 1.
Open the dirty nappy / diaper and leave it under the baby’s bottom.

Step 2.
Squeeze the Baby Bum Shower to spray the baby’s bottom and cleaning away any waste.

Step 05 new.png__PID:354025d5-657c-40d5-915c-65a7c1c38474

Step 3.
Wipe top down, to remove excess waste away from the baby’s bottom.

Step 4.
Squeeze the Baby Bum Shower again to spray the baby’s bottom and cleaning away any remaining waste.

Step 5.
Remove the dirty nappy / diaper from under the baby’s bottom.

Step 6.
Spread nappy / diaper cream on the baby’s bottom.

Put a new clean nappy / diaper on the baby.

Back on top

Non-leak Procedure

closing-the-lid-01.png__PID:ead6f907-a0a6-4fc0-a2d1-ac6f3de26cd3

Step 1.
Open the lid, get the stopper.

closing-the-lid-02.png__PID:d6f907a0-a6af-4022-91ac-6f3de26cd319

Step 2.
Put the stopper on the water valve.

closing-the-lid-03.png__PID:f907a0a6-afc0-42d1-ac6f-3de26cd319bd

Step 3.
After screwing the lid to the body, twist the lid to the right.

closing-the-lid-04.png__PID:f590155d-d919-420c-93ca-c1fa84fa015d

Step 4.
Check if the water valve is already covered. Then it will be ready for storage or travel without leaking.

Back on top

EASY TO REFILL

Step 1. Simply unscrew the base & fill with a small amount of neutral pH balanced emollient based wash, or what you are using at bath-time.

Step 2. Fill with lukewarm water to dilute the solution. Follow the manufacturers guidelines.

Step 3. Twist back on the base & you're ready to go. Simply squeeze to spray.